Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

Synthesis,crystal structure and conformational analysis of an unexpected [1,5]dithiocine product of aminopyridine and thiovanillin

The condensation reaction of 2‐mercapto‐3‐methoxybenzaldehyde with 3‐aminopyridine afforded an unexpected N‐alkylated [1,5]dithiocine instead of the N‐salicylideneaniline. The proposed mechanism for this condensation involves a strong intramolecular hydrogen bond between the thiol and the amine groups, leading to a second condensation. The corresponding product, i.e. 4,10‐dimethoxy‐13‐(pyridin‐3‐yl)‐6H,12H‐6,12‐epiminodibenzo[b,f][1,5]dithiocine methanol 0.463‐solvate, C₂₁H₁₈N₂O₂S₂·0.463CH₃OH, was characterized by single‐crystal X‐ray diffraction analysis. The supramolecular structure shows π–π stacking and S…S interactions in the crystal packing. Within the asymmetric unit, two geometries of the N atom are observed. Although a planar geometry should be expected, a pyramidal one is observed due to the crystal packing. The presence of the two geometries was further supported by density functional theory (DFT) calculations that show an electronic energy difference of less than 2 kJ mol^?1 between the two conformers.     

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm² in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.     

基于细胞穿膜肽的药物递送研究进展

从细胞穿膜肽(CPP)的分类、内化机制、与货物的连接和应用四个方面讲述目前人们在对细胞穿膜肽的研究上已经取得的成果。细胞穿膜肽是一种能穿过细胞膜的短肽,可分为阳离子型肽、两亲性肽和疏水性肽。细胞穿膜肽的内化机制主要有内吞作用、直接渗透、依赖于糖蛋白的内化机制和依赖于浓度的内化机制等。近年来,人们合成了多种有实际应用价值的CPP-货物复合物,在细胞穿膜肽的应用上,取得了很多进展和突破。科学家们主要研究将细胞穿膜肽应用于药物递送和细胞成像。     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

On a question of Thas on partial 3‐(qn + 1, q + 1, 1) designs

In this note, we answer a question of JA Thas about partial $3$‐ $\left(q^n+1,q+1,1\right)$ designs. We then extend this answer to a result about the embedding of certain partial $3$‐ $\left(q^2+1,q+1,1\right)$ designs into Möbius planes.     

A note on 3‐partite graphs without 4‐cycles

Let $C_4$ be a cycle of order 4. Write $ex\left(n,n,n,C_4\right)$ for the maximum number of edges in a balanced 3‐partite graph whose vertex set consists of three parts, each has $n$ vertices that have no subgraph isomorphic to $C_4$. In this paper, we show that $ex\left(n,n,n,C_4\right)\ge \frac{3}{2}n\left(p+1\right)$, where $n=\frac{p\left(p?1\right)}{2}$ and $p$ is a prime number. Note that $ex\left(n,n,n,C_4\right)\le \left(\frac{3\sqrt{2}}{2}+o\left(1\right)\right)n^{\frac{3}{2}}$ from Tait and Timmons's works. Since for every integer $m$, one can find a prime $p$ such that $m\le p\le \left(1+o\left(1\right)\right)m$, we obtain that $\underset{n\to \infty }{\lim }\frac{ex\left(n,n,n,C_4\right)}{\frac{3\sqrt{2}}{2}{n}^{\frac{3}{2}}}=1$.     

An Approach to Paracyclophane-Based Tetrathiafulvalenes: Synthesis and Characterization of a Pseudo-Geminal [2.2]Paracyclophane 1,3-Dithia-2-Thione

The synthesis of paracyclophane-based tetrathiafulvalene precursors is described in the context of the importance of these compounds in the field of material chemistry. Pseudo-geminal bis(1,3-dithia-2-thione) was synthesized via the corresponding 1,3-dithiol-2-ylium salt. The latter was obtained by a synthetic procedure that involves 4,15-bis(acetyl)[2.2]paracyclophane, a new compound of interest for many researchers.